Facing issues with your wildgame innovations trail camera?
No worries! We have got your back.
Wild photography plays a crucial role in documentaries involving animals, and trail cameras help to capture them in vivid details.
Often, wild photographers have problems with their trail cameras.And after a thorough analysis; we have discovered that most of these problems can be solved with ease. Sadly, with inadequate instructions, many people abandon their shooting session if they face trouble with their trail cameras.
But if you calm down and relax, solutions to this troubleshooting will arise.
So today, we will guide you if you have had to encounter issues with your camera. Along with that, we will help you with the instructions of the Wildgame Innovations Trail Camera, which will hopefully put a halt to these problems.
So, let us dive into the main discussion!
Post Navigation
Common Wildgame Innovations Trail Camera Troubleshooting
You are probably well aware that trail cameras are generally used for remote or automatic shots. Considering this fact, you should also be able to understand that the gadget does not stay in the hands of the person, which may result in a few problems.
This interrupts the photography, stopping the flow of your valuable shots. Hence, troubleshoots in these trail cameras are often quite the same. We will now be discussing some of the common problems and serving the solutions right after.
Display Troubleshoots
Having a display that does not work quite correctly is something ordinary for a trail camera. The display does not get the light properly, or sometimes it can be completely off. And once it turns on, the image seems to be blurry.
If this has happened to your trail camera, then you must have thought that the display has gone dead. Well, sit back and relax! we are going to provide you with some suggestions which might come in handy.
Solutions
- Before doing anything, check if your battery has sufficient charge. If your battery is nearly out of charge, the camera might surprisingly manage to remain on, but the display will turn off. So, if this is the case, then replace the battery, but do not make the grave mistake of using a rechargeable battery.
- Quite often, the memory card locks the entire camera, and this results in malfunctioning of the display. You should format the card which will reset the camera and then insert the card into the camera again.
Troubleshoots during Saving Photos
When it comes to a trail camera, you usually set it up and then merrily wander around. However, when you come back, you might be devastated to see that NOT A SINGLE photo of yours has been saved.
This can be very frustrating for photographers. You should definitely take a look at our solutions if this has happened to you in the past.
Solutions
- Take a look at the SD card and inspect if it is compatible with the camera or not.
- Your photos will not be saved if your SD card does not have enough space. So it is a must to check if the SD card has the required space.
- The SD card might not be properly attached to the slot, and so the photos might not be saved. Hence, make sure that it is in the slot properly.
- If all else has come to fail you, then you might want to format the SD card.
Troubleshoot Involving the Lighting of the Photos
If you are a wild photographer and have had to face this problem, then you are definitely not the first. We would recommend you not to worry because this is not a fault in your camera; rather it is an issue caused by the setting.
Solutions
- If you take a close look at your camera exposure scale, you will notice that there is a plus sign on one side and minus on the other. Themarker which indicates the perfect exposure position should be kept near the plus sign if the photo does not have sufficient light, to make it look brighter.
Troubleshoot in the Display Blinking
It is not unusual to see a display that begins to blink. Do not let this kind of problem bother you a bit because you are going to get the cure NOW.
Solutions
- You might consider getting a new memory, or you could also format it.
The Problem Still Stands Tall?
If you have applied all the solutions provided by us but still cannot get your desired results, then your trail camera most likely has some sort of physical defect.
We would highly recommend you to take your camera and pay a visit to the company service center if you have a warranty. However, if you do not have a warranty, then getting it serviced in a good servicing center would be a wise decision.
Check Here Some Best Wildgame Innovations Trail Camera
Conclusion
We believe we have been able to provide you with sufficient information regarding the troubleshoots of the Wildgame Innovations Trail Camera.
Hopefully, you have found this article to be helpful and solve the problem that has been the cause of your headache.
Last update on 2020-11-26 / Affiliate links / Images from Amazon Product Advertising API
I have a trail camera made in 2015 SW version 12i20D2-01092015, it has been a very good camera for me, but it stopped taking pictures at night. It takes but only black screen appears. I have checked to make sure batteries are good and I have double checked the settings several times with no luck. Can this be repaired or is it worth it. I really like the camera, but things do wear out I suppose.
If you really like this camera you repaired it.
I have a wgi camera, when I turn camera on it gives me a err message. Brand new batteries and blank sd card…. please help!!! Almost hunting season and need to get camera out into the woods. Ty
Please reset the settings. it can helpful for you.
Trail cam pictures are too light in the day. Looks like the sun is shining on the lens, but is not, Also draining the batteries. There will be good pictures and then plain white pictures where you can’t seen anything. Seems to be fine at night…thanks Catfish
I have a Wildgame Innovations Camera – Last year I set it up and it took a picture on motion and every minute for a solid week. I turned it off; put a new card in – then the camera worked perfectly (without taking a picture every minute). This year – I setup the camera in the same spot; and once again it has taken a picture every minute for a solid week. Has anyone else had this issue? If so, how was it resolved?
And, no, there is nothing in front of the camera that is triggering it.
Mine is doing the same thing. Keeps taking pictures every minute but 4 at a time.
Just purchased a wgi switch camera. every time i turn the camera off it reverts
back to factory timesettings and i have to manually put in the date and time any reason for this? Brand new batts and formated sd card.